• 2009-09-28

    电路图中英文对照表

    Tag:

    版权声明:转载时请以超链接形式标明文章原始出处和作者信息及本声明
    http://www.blogbus.com/dickmoore-logs/53711672.html


     
    3VTXEN2              发射供电 
    3VBANDSEL            频段选择供电 
    3VBRIGHT             射频供电 
    3VRF                 射频供电 
    3VSYNTH              频率合成供电 
    3VTX                 发射供电 
    3VTXEN1              发射供电 
    ADD                  地址线 
    AFC                  自动频率控制 
    AGC                  自动增益控制 
    Alarm                闹铃触发 
    ALERT                振铃启动 
    AVCC                 音频供电 
    BACKLIGHT            背光灯控制 
    BANDSEL              频段选择 
    BAT_VOLT             电压检测 
    Bat-Det-En           电压检测启动 
    Boost-En             升压启动 
    Bp-Det               电压检测  
    Bp-Vf                电量检测 
    BUZZER               振铃 
    Buzzer-En            振铃启动   
    Charger-Disable      充电启动 
    CHR_ON               充电启动 
    Clk-Rqst             时钟供电启动   
    COL                  按键列扫描信号 
    CONEXANT             美国科胜讯公司 
    CPU ON OFF           开机维持 
    CS FLASH             字库片选 
    CS ROM               版本片选 
    CSRAM                暂存片选 
    CSRAMH               暂存高八位片选 
    CTS1                 RS232 接口时钟 
    DATA                 数据线 
    DCIN                 充电请求 
    Dcs-Sw               1800MHz 开关信号 
    DCVOLT               外接电源 
    Debug-Rx             调试数据接收           
    Debug-Tx             调试数据发射 
    DSR1                 测试端口 
    DTR1                 系统控制端口 
    EARSW                耳机开关控制 
    Flash-Program        字库编程 

    Flash-Sel            字库片选 
    Flip-Sns             翻盖控制 
    Green-Led-En         绿灯控制 
    Gsm-Sw               900MHz 开关信号 
    Highband             频段选择 
    ICHRG                充电电流控制 
    IFLO                 二本振 
    JACKIN               耳机插入检测 
    Kbd-Rtn              按键行扫描信号 
    Kbd-Strb             按键列扫描信号 
    LCD_CS               显示屏片选 
    LCD-EN               显示屏启动 
    Lcd-Sel              显示屏片选 
    Led-Cntl             显示背光启动 
    Lower-Byte           暂存低八位控制 
    MIC-                 本机话筒负极 
    MIC+                 本机话筒正极 
    MIC2N                外接话筒负极 
    MIC2P                外接话筒正极 
    Mic-Bias             话筒供电 
    M-IRQ                音乐中断请求 
    MMC_CS               音乐 IC 片选 
    M-RESET              音乐 IC 复位 
    Mrt-En               振子启动 
    ON_OFF               开机触发 
    Pmic-Reset           复位 
    Por                  复位 
    POWER ON             开机启动 
    Pwr-Onoff            开机触发 
    Pwr-Sns              开机请求 
    RAMP                 功率等级 
    Ram-Sel              暂存片选 
    RD                   读控制 
    Read                 读控制 
    REC-                 本机听筒 
    REC+                 本机听筒 
    Red-Led-En           红灯控制 
    REED                 干簧管 
    Reset-B              复位 
    Rf-Cpl               功率取样 
    RFLO                 一本振 
    RFVIN                未调整电压 
    RI-BLUE              蓝灯控制 
    RI-GREED             绿灯控制 

    RI-RED               红灯控制 
    ROW                  按键行扫描信号 
    RST                  复位 
    RTC_3V3              备用电池充电电压 
    RTC_VCC              实时时钟电压 
    RXD                  RS232 接收数据 
    Rx-En1               接收启动 1 
    Rx-En2               接收启动 2 
    Rx-Gain0             自动增益控制 
    Rx-if                接收二中频 
    RXIQ                 接收基带 
    RXLO1                接收一本振 
    Rxmxo                接收二中频 
    S_Clk                串行时钟 
    S_Dat                串行时钟 
    SCL                  串行时钟 
    SCLK                 频率合成时钟 
    SDA                  串行数据 
    SDATA                频率合成数据 
    Sds-Rx               并行数据接收                 
    Sds-Tx               并行数据发射 
    Send-End             耳机控制            
    SIMALIM              卡供电控制 
    Sim-Clamp            卡供电启动 
    SIMCLK               卡时钟 
    SIMDATA              卡数据 
    Sim-En               卡启动 
    SIMPRES              3V/5V 卡检测 
    SIMPWON-BOOT         卡升压启动 
    SIMRST               卡复位 
    SIMVCC               卡供电 
    SPK-                 本机听筒 
    SPK+                 本机听筒 
    SPK2N                外接听筒 N极 
    SPK2P                外接听筒 P极 
    SW-DC                未调整电压 
    Syn0-Lck             频率合成锁定 
    Syn1-En              频率合成启动 
    Syn-Clk              频率合成时钟 
    Syn-Dat              频率合成数据 
    SYNEN                频率合成启动 
    SYNEN1               频率合成启动 
    SYSCLK               系统时钟

    SYSCLKENA            系统时钟启动 
    Sys-Ref              参考频率 
    SYSRST               系统复位 
    Ta-Det               充电触发 
    Ta-Present           充电请求  
    TCK                  外部测试时钟 
    TDI                  测试口数据输入 
    Tlcpo                发射锁相电压 
    TMS                  外部测试 
    TXD                  RS232 发送数据 
    Tx-En0               发射启动 1 
    Tx-En1               发射启动 2 
    Tx-En2               发射启动 3 
    TXIF                 发射中频 
    TXIQ                 发射基带 
    TXLO1                发射一本振 
    Tx-Pwr               功率等级 
    Txrf1                发射取样信号 
    Uhf-Tune             一本振锁相电压 
    Upper-Byte           暂存高八位控制 
    VAPC                 功率控制电压 
    VBATT                电池电压 
    VCC                  逻辑供电 
    Vccd                 逻辑供电 
    Vext                 外接电源 
    VF                   电池电量检测 
    Vhf-Tune             二本振锁相电压 
    VIBEN                振子启动 
    VIBRATOR             振子 
    Vosc                 时钟供电 
    VPAC                 功控供电 
    VRF                  射频供电 
    Vset                 充电电流控制  
    Vsim-Ref             升压 
    VSW                 &nb ...
    分享到: